1
3
2
2
A
B
C
27
MOD.
A
B
C
500
500
120
500
500
120
500
500
120
500
500
120
500
500
120
INSTALLATION OPERATIONS AND MAINTENANCE MANUAL - RXC/Hi SERIES
005
010
015
025
035
12.4 Lifting and Handling
When unloading and positioning the unit, care must be taken to avoid sudden or violent manoeuvres to protect internal com-
ponents. Lifting should be done using a forklift or alternatively using straps, taking care not to damage the side and top panels
of the unit.
The length of the forks must be adequate for the length of the section to be handled in order to avoid the risk of tipping over
and/or damaging the bottom of the unit.
During handling and transport, sections must remain in position as packed at the factory, and absolutely no tipping or tilting
should be done.
12.5 Positioning and minimum technical spaces
The drawing below shows the false ceiling installation (suitable for residential areas, offices etc.) where the unit is suspended
thanks to dedicated fixing brackets. The brackets must be connected to anti-vibration dampers which must be selected accord-
ing to the type of structure they will be fixed to. It is recommended to coat the inside of the false ceiling with a high density
sound-absorbing material and to allow for one or more openings for the access and cleaning of the air filters, for the control
of the refrigerant circuit, the maintenance and the check of the control board.
CAPTION:
1. Ceiling | 2. Side walls | 3. Removable false ceiling
Install the unit to allow ordinary and extraordinary maintenance. The warranty does not cover costs related to
platforms or handling equipment necessary for any intervention.
Choose the installation site in accordance with EN 378-1 and 378-3.
