Vortice HRI-E ONE, Instruction Booklet

Page: 23 / 136

Switching On/Off (fig.16)
The appliance is switched on and off by pressing and
holding the DOWN button on the panel.
Time/day setting (fig.17)
Before proceeding with the steps indicated below, press
the ESC button to quit and return to the initial menu.
The current time and day can be set as follows:
- press the UP and DOWN buttons together briefly;
- press the UP or DOWN button repeatedly to select the
"hours” setting (HH);
- press the SET button briefly to retain the “hours” setting
and move on to the “minutes” setting (MM);
- press the UP or DOWN button repeatedly to select the
"minutes”;
- press the SET button briefly to retain the “minutes”
setting and move on to the “day” setting (dAy);
- press the UP or DOWN button repeatedly to select the
"day” setting;
- press the SET button briefly to retain the “day” setting
and quit.
Speed setting (fig.18)
Before proceeding with the steps indicated below, press
the ESC button to quit and return to the initial menu.
The operating speed is preset during appliance
configuration, and can be selected by pressing the UP
button briefly (1=min. speed, 2=med. speed, 3=max.
speed).
Set required room temperature (fig.19)
Before proceeding with the steps indicated below, press
the ESC button to quit and return to the initial menu.
The preferred room temperature can be selected as
follows:
- press and hold the SET button
- press the SET button briefly (the current value flashes)
- select the required value using the UP and DOWN
buttons
- press the SET button briefly to retain the setting
- press the ESC button briefly to exit.
Activation of "bypass” function (fig.20)
esc set
By-Pass
/ °C
1 2 3 4 5 6 7
FILT
P1 P2
Prg
16 1 16
HA
esc set
By-Pass
/ °C
1 2 3 4 5
6
7
FILT
P1 P2
Prg
17 1 17
HA
esc set
By-Pass
/ °C
1 2 3 4 5
6
7
FILT
P1 P2
Prg
18 1 18
HA
esc set
By-Pass
/ °C
1 2 3 4 5 6 7
FILT
P1 P2
Prg
19 1 19
HA
ENGLISH
esc set
By-Pass
/ °C
1 2 3 4 5
6
7
FILT
P1 P2
Prg
20 2 20
HA
23