VORTEX FACTORY: Via E. Fermi, 5 – 27040 Campospinoso (PV)– ITALY – Tel. +39 0385 765200
VORTEX FACTORY: Via E. Fermi, 5 – 27040 Campospinoso (PV)– ITALY – Tel. +39 0385 765200
OTK KART GROUP srl
Via dei Soprini, 16 – 25080 PREVALLE (Brescia) ITALY-‐Tel. +39 030 6804601 – Fax +39 030 6804698
Rev. 30/09/15
9
10mm Fixed Wrench
4 mm Allen Wrench
Mounts the fuel pump.
Fix in between the support bracket and
the fuel pump, one 5mm and one
10mm spacer.
Fix airbox bracket also, by using one
5mm and one 10mm spacer and 6mm
screw, washer and self locking nut..
10
Flat Screwdriver
Remove the plastic cap from the head.
Spark Plug Wrench
Tighten the spark plug in the engine head.
Tighten and loosen the spark plug 2/3 times to
allow the gasket to seat. Then tighten the spark
plug securely.
11
Insert the coil cable into the rubber plug cup so
it is tight (photo 1).
It is recommended to secure the coil cable by
using a plastic tie (photo 2).
Place the plug cap on to the spark plug and
push the plug cap down firmly.
1
2
