VORTEX FACTORY: Via E. Fermi, 5 – 27040 Campospinoso (PV)– ITALY – Tel. +39 0385 765200
VORTEX FACTORY: Via E. Fermi, 5 – 27040 Campospinoso (PV)– ITALY – Tel. +39 0385 765200
OTK KART GROUP srl
Via dei Soprini, 16 – 25080 PREVALLE (Brescia) ITALY-‐Tel. +39 030 6804601 – Fax +39 030 6804698
Rev. 30/09/15
17
Insert manually the relay into the female plug
in the wiring loom.
Do not use any tool.
18
14 mm Fixed Wrench
Place the start bottom (Green) and the stop
bottom (Red) in the two slots located in the
front of the battery cradle. Secure them with
the specific nut attached in the cables.
19
Place the battery in the battery cradle. Insert
the battery cables in the battery plugs. Red
cable in red plug, black cable in black plug.
Secure the battery using the two rubber O.R.
provided.
