VorTek SonoPro S36 Series, Instruction Manual

Page: 59 / 107

Series S36 Instruction Manual Chapter 4 Serial Communications
800120 4-2
flow meter using SonoConfig ™ Instrument Interface software to
assist with setup, diagnostic, and data logging features. Refer to
Chapter 5 for more information on SonoConfig
™ Instrument
Interface software.
Figure 4-2. Bluetooth® Antenna on SonoPro® Professional Series
Connect to a Device
To connect your SonoPro® to the SonoConfig ™ Instrument
Interface Software using Bluetooth® wireless communication,
refer to the procedure, Instruction Manual - SonoConfig
™ ,
available at www.vortekinst.com.
Modbus Communications
Refer to the document, Start-up Guide – ProtoCessor FPC-ED2,
for all information relating to the ProtoCessor and how to
configure the ProtoCessor to communicate via Modbus. This
document can be found at www.vortekinst.com.
Applicable Flow Meter Models Only
The SonoPro® Professional Series Flow Meter utilizes an MSA
Safety ProtoCessor that provides a TTL to RS-485 and Ethernet
connection for Modbus RTU or Modbus TCP/IP communication
depending on the model code configuration ordered. The MSA
Safety ProtoCessor will leave the factory configured for the
communication protocol selected at the time of order. If later the
communication protocol needs to be changed (e.g., from Modbus