In most circumstances it is not necessary to reconfigure the wireless side
address (the 192.168.2.100 address that the remote GUI uses to connect via
wireless) because it is the wired side of the interface that is normally attached to
a station’s local area network.
An important concept to remember about how the wireless module functions is
that the Ethernet IP address of the module isn’t
its
IP address – it’s the IP
address to which packets received on the wireless side are forwarded to.
Also, the Gateway address of the module’s wired side is the IP address that a
web browser should be pointed in order to log in and modify the module’s
networking configuration.
Changing the Configuration
With the AirAura directly connected to a PC that is not connected to any external
wired networks, open a web browser and enter the IP address of 192.168.1.1 in
the URL address field (see below).
At the login prompt, enter the credentials “dpac” for the User name and “dpac” for
the Password – both are lowercase.
