10
English
Before initial use, you must soak the Mineral Cartridge in water for 24 hours.
You may use a separate container or Water Tank to do so. If Tank is used, empty
water and refill with fresh water prior to use. Note: the unit may take several
minutes to create mist with the initial use of a new Mineral Cartridge.
1.
Unplug humidifier and place on level surface, such as floor.
Note:
Spills can occur during cleaning, moving or refilling Water Tank, so be
careful to avoid spills when doing these activities.
2.
Remove Water Tank by grasping recessed handle and pulling toward you (A).
3.
Turn Water Tank upside down and remove Cap (B).
4.
Fill Water Tank with cool tap water (C).
5.
Ensure Gasket (rubber ring around Cap) is properly positioned and replace
Cap. Some downward pressure may be needed to compress Gasket prior to
rotating Cap clockwise.
6.
Lower Water Tank into Base, positioning Water Tank over raised bump in
Base. Once in nested position, water outlet valve inside Cap opens, releasing
water into Base.
Note: The rate of water dispensing from Water Tank into Base is controlled by
the Mineral Cartridge. The unit may take several minutes to fill the Base.
FILLING WATER TANK
This humidifier has a 2-gallon capacity and 3.5-gallon output in 24
hours (if set to High Fan Speed, Continuous Humidity setting).
C
B
A
