English
11
HIGH
Operation for fast humidification of larger rooms. High-speed operation
will evaporate 3.5 gallons of water (+/- 10%) in 24 hours of continuous
operation. (This assumes room conditions of 70º F and 30% relative
humidity.)
LOW
Operation for quiet, nighttime use or smaller rooms. On Low operation,
your humidifier may run without refilling for extended periods.
HUMIDITY – 40%–60% OR CONTINUOUS
Set the humidity level by pressing the HUMIDITY button until the
desired humidification level is illuminated. The humidifier will operate
until the desired humidity level is reached. At this point, the mist will
turn off but the fan will continue to run. The Humidity Level indicator
light will remain on. If the mist does not turn on, the humidity setting
may be lower than the room humidity level. Increase the humidity set
point until the mist turns on. This is an indication of the level of humidity
already in the room. While in Continuous setting, the humidifier will run
continuously (both fan and mist).
HOW TO USE
1.
Position humidifier to not blow directly on objects or plants. Plug power
cord into 110–120 volt AC outlet.
2.
To turn humidifier on, press Power Button. The LCD screen will
illuminate when powered On and as settings are adjusted. Once
settings have been selected the LCD screen will dim.
3.
Select Mist Condition, Fan Speed and desired Humidity Level (or
Continuous) for a personalized experience. The humidifier also offers
two programmed settings:
•
Auto1 - Continuous misting, cool mist, low fan speed.
•
Auto2 - Continuous misting, warm mist, high fan speed.
The temperature of the mist on Warm Mist setting is approximately 94-98
degrees at the Mist Outlet. However, the mist will feel cooler to the touch
because it is immediately entrained in the Vortex beam of air generated by
the fan.
Note:
Lower humidity control settings or turn off humidifier if moisture
forms on walls or windows.
4.
Notifications:
Refill Tank
- Notifies you when the Water Tank needs to be refilled.
Will automatically turn off after it has been refilled.
Clean Unit
- Displays after 400 hours of operation. It is recommended
to clean your Humidifier at this time (see CLEANING). To reset
notification, press and hold the Power Button for 3 seconds.
Replace Mineral Cartridge
- Displays after 800 hours of operation. It
is recommended to replace the Mineral Cartridge at this time (see
MINERAL CARTRIDGE). To reset notification, press and hold the
Power Button for 3 seconds.
