17
English
TIPS
Unit is not plugged in. Plug power cord into electrical outlet.
House
hold circuit breaker/ground fault circuit interrupter has tripped or blown fuse. Reset circuit breaker/
ground fault circuit interrupter, or replace fuse. For assistance, see IMPORTANT INSTRUCTIONS.
Unit is damaged or in need of repair. Cease usage and unplug. Contact Consumer Service for assistance.
This is normal. Water is being dispensed into Base.
Water level in Tank is empty or too low. Refill with clean, cool tap water. See HOW TO USE.
Unit has reached its set point. When set humidity level is reached, the unit will not produce mist until humidity
level in the room drops below humidity set point.
Airflow is blocked. Remove obstruction.
Unit settings are too low. Set to High Output and Continuous Humidity for maximum humidity output.
Mineral Cartridge is no longer removing minerals from water. Cartridge needs to be replaced. See MINERAL
CARTRIDGE.
Unit and Transducer is in need of cleaning. See CLEANING.
Water is too hard. Use distilled water.
Unit fails to power on.
Unit makes bubbling
or gurgling sound.
Unit is not producing
desired amount
of humidity or mist
output has ceased.
White dust has
accumulated on Mist
Outlet or on flooring
below.
TROUBLESHOOTING
POSSIBLE CAUSE AND SOLUTION
PROBLEM
