background image

6

English

-

  

Children should be supervised to ensure that they do not play 

with the appliance.

-

  

Cleaning and user maintenance shall not be attempted by 

children without supervision.  

-

  

This product and its packaging material are not toys and should 

be kept out of reach of children.

This product employs overload protection (fuse). A blown fuse 
indicates an overload or short-circuit situation. If the fuse blows, 
unplug the product from the outlet. Replace the fuse as per the user 
servicing instructions (follow product marking for proper fuse rating) 
and check the product. If the replacement fuse blows, a short-circuit 
may be present and the product should be discarded or returned to 
an authorized service facility for examination and/or repair.

User Servicing Instructions

Grasp plug and remove from the receptacle or other outlet device. Do 
not unplug by pulling on cord. Open fuse cover (A.) by sliding access 
cover on top of attachment plug toward blades. Remove fuse carefully 
(B.) by gently prying out the ends of the fuse from the receptacle.

Risk of fire.

 Replace fuse only with 2.5 Amp, 125 Volt fuse. Contact 

Vornado customer service for replacement fuse.
Phone: 1-800-234-0604 email: [email protected]
  
Install replacement fuse (C.) by first placing the end of the fuse into 
the fuse receptacle, which is opposite of the blades of the plug, then 

carefully push in the other end. Only push against the metal end of 
the fuse, not the glass center portion. Close the fuse access cover (D.) 
by sliding the cover back into the plug until it is completely closed, 
latches and is flush with the face of the plug. 

Risk of fire.

 Do not 

replace attachment plug. Contains a safety device (fuse, AFCI, LCDI) 

that should not be removed. Discard product if the attachment plug 
is damaged.

WARNING: 

Changes or modifications to this unit not expressly 

approved by the party responsible for compliance could void the 
user’s authority to operate the equipment.

This equipment may generate, use and/or radiate radio frequency 
energy that may cause harmful interference to radio communications. 
If this equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and 
on, the user is encouraged to contact Vornado Consumer Service at 
1-800-234-0604.

IMPORTANT INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING.

A.

B.

C.

D.

Summary of Contents for FANJR

















Reviews: