VopTel Technology Co., Ltd
Page 39/67
Figure 2-10
Configuration Interface for Subscriber Line Features
Table 2-13
Configuration Parameters of Subscriber Line Features
Name
Description
Line ID
Select a subscriber line required to configure. “FXS -n” corresponds to the
“Line > FXS phone Number > ID n”. Copy the configuration of “FXS -n”
for selected line to “FXS -n+1”~“FXS - m” by clicking “Batch”, where n
indicates the current selected subscriber line number and m indicates the
total number of subscriber lines.
Phone number
Display the Telephone Number of this line set in “Line Configuration > FXS
phone Number”. Users can input or change the telephone number here.
Registration
Setelect if this line is required to register with softswitch. This is selected as
default.
Password
If the “Registration” is selected, users need to enter the authentication
password for register of this line here.
Note: The following features are valid only in SIP protocol. When the gateways use MGCP
protocol, features are controled by the proxy server without the need of setting on gateways.
Hot line
Select if the gateways are required to automatically dial out the hotline
number after offhook. By default, hot line is disabled.
z
Disable hot line: Close this feature.
z
Hot line: Automatically dial out the hotline number after offhook.
z
Delayed hot line: Automatically dial out the hotline number after offhook
is timeout with a time delay of 5 seconds.
Hot line number
After the hotline function is activated on this line, the hotline number must
be entered here.