VopTel Technology Co., Ltd
Page 28/67
Table 2-6
SIP Configuration Parameters
Name
Description
Signaling port
Configure the UDP port for transmitting and receiving SIP messages, with
its default value 5060.
Note: The signaling port number can be set in the range of 1-9999, but
cannot conflict with the other port numbers used by the equipment.
Register server
Configure the address and port number of SIP register server, and the
address and port number are separated by “:”. It has no default value.
The register server address can be an IP address or a domain name. When a
domain name is used, it is required to activate DNS service and configure
DNS server parameters on the page of configuring network parameters. For
example: “201.30.170.38:5060”, “register.com: 5060”.
Proxy server
Configure the IP address and port number of SIP proxy server, and the
address and port number are separated by “:”. It has no default value.
The proxy server address can be set to an IP address or a domain name.
When a domain name is used, it is required to activate DNS service and
configure DNS server parameters on the page of configuring network
parameters. Examples of complete and effective configuration:
"201.30.170.38:5060", "softswitch.com: 5060".
Backup proxy
server
Configure the IP address and port number of backup proxy server. It has no
default value. Add the address of calling proxy server here, and the
gateways can support selection function of multiple softswitch addresses
through IP address. The format must be IP address format and complete and
effective configuration, eg. “202.202.2.202:2727”. The proxy and register
severs must be identical.
Conditions for falling over to the backup proxy server (any):
1
）
Gateway register is timeout;
2
）
No response to master server calls is timeout;
User agent
domain name
This domain name will be used in INVITE messages. If it is not set here, the
gateways will use the IP address or domain name of proxy server as user
agent domain name. It has no default value.
It is recommended that subscribers not use LAN IP address to set domain
name parameter.
Authentication
mode
The gateway support three registration sheme: register per line, register per
gateway and Line Reg/GW Auth. The default value is register by line.
z
Register by line: authentication and register per line;
z
Register by gateway: authentication and register per gateway;
z
Line Reg/GW Auth: register per line, but authentication per gateway.
User name
Configure the user name as part of the account for registration, and it has no
default value.
Note: If “Register by gateway” or “Line Reg/GW Auth”, is selected, the
user name must be entered here. If “register by line” is selected the user
name should be set on “Line > Feature” page (Refer to “Feature”).
Password
Password as part of account information is used for authentication by
platform. It has no default value. It is formed with either numbers or
characters, and case sensitive.
Note: If “Register by gateway” or “Line Reg/GW Auth”, is selected, the
password must be entered here. If “register by line” is selected the password
should be set on “Line > Feature” page (Refer to “Feature”).
Registration
period
Valid time of SIP re-registration in second.