VopTel Technology Co., Ltd
Page 29/67
2.3.4
MGCP Configuration
The gateways use SIP protocol by default. When the gateways need to interface with MGCP protocol
-based softswitch platform, users should set relevant parameters here.
After login, click “Basic > MGCP” tab to open the configuration interface.
Figure 2-5
MGCP Configuration Interface
Table 2-7
MGCP Configuration Parameters
Name
Description
Signaling port
Configure the UDP port for transmitting and receiving MGCP messages,
and default is 2427.
Note: The signaling port number can be set in the range of 1-9999, but
cannot conflict with the other port numbers used by the equipment.
Proxy server
Configure the IP address and port number of MGCP proxy server, separated
by “:”, and it has no default value.
The address can be set to an IP address or a domain name according the
subscribers’ requirements. When a domain name is used, it is required to
activate DNS service and configure DNS server on the page of configuring
network parameters. Examples of complete and effective configuration:
“202.202.2.202:2727”, “callagent.com: 2727”.
User agent
domain name
It is the gateway logo when the gateways register with proxy server, and it
has no default value.
Example: test.newrock.com, [192.168.2.100].
Default event
package
List all the types of default event packages supported by gateways, and
multiple package names are separated by“,”.
The default value is L,D,G.
z
L: Line Package;
z
D: DTMF Package;
z
G: Generic Media Package.
Persistent line
event
List the event types that the gateway can report, and persistent line events
are separated by “,”. When gateways process the events listed here, they
will report to the call agent.
Note: This parameter must be set since there is no default value. The
factory setting is L/HD, L/HU:
z
L/HD: Offhook;
z
L/HU: Onhook.
FXO event
package
Handset Package
Line Pakage