4.2.5.3.2 Duplicate RTP
1 No
duplicate
2 One
duplicate
3 Two
duplicate
4.2.5.4 RPort Setting: RPort Enabled/Disabled
4.2.5.5 Hold by RFC
4.2.5.6 Status: Show the SIP Proxy register status. You can use UP/Down key to check each Realm’s status.
1 First
Realm
2 Second
Realm
3 Third
Realm
4.2.6 NAT Transversal
4.2.6.1 STUN setting
4.2.6.1.1 STUN: STUN
4.2.6.1.2 STUN server
4.2.7 Administrator
4.2.7.1 Auto Config
4.2.7.1.1 Config Mode: You can select Disable/TFTP/FTP to do the auto config function. This function
must work with the Auto Config Server.
4.2.7.1.2 TFTP server: Setting the TFTP server IP address.
4.2.7.1.3 FTP server: Setting the FTP server IP address.
4.2.7.1.4 FTP Login Name: Setting the login name to the FTP server.
4.2.7.1.5 FTP Password: Setting the Password to the FTP server.
4.2.7.2 Default setting: You can restore to the default setting..
4.2.7.3 System Authentication: To do the SIP setting from Keypad, need to input the password first. Default is
“test”.
4.2.7.4 Version: This will show the system’s firmware version.
4.2.7.5 Watch Dog: You can use this to enable Watch Dog function to do the debugging.
4.2.7.6 Restart: You can use this function to restart your IP Phone.