Vook VDT2504HE User Manual Download Page 56

Page: 56 / 116

DVR User Manual

Step 1: Copy the upgrade software which gets from vendor into the USB storage device
Step 2: Connect the USB flash drive to the USB port.
Step 3: Enter Menu

Upgrade tab. Then the upgrade software name would be displayed in the upgrade list box.

Step 4: Select that software and then click upgrade button. It will upgrade automatically.

Note:

Please wait for a while when the system reboots. Never cut off power during upgrading. The original configuration will be

reserved after upgrade.

6.5 Logoff

Enter into Menu

Logoff tab. A log off dialogue box will popup. The device will log off by clicking “OK” button. If you want to log

in again, click

icon to enter into user name and password to re-login.

Summary of Contents for VDT2504HE





















































































































Search results

Summary of Contents for VDT2504HE

Reviews:

Related manuals for VDT2504HE

Brands by name

Popular brands

Vook VDT2504HE, User Manual

Search results

Summary of Contents for VDT2504HE

Reviews:

Related manuals for VDT2504HE

Brands by name

Popular brands