DVR User Manual
18
Click Menu
button to pop up a window as Fig 4-2; you can also press MENU button on the front panel or operate with
remote controller to display the main menu. Clicking Setup icon will pop-up the configuration menu:
Fig 4-2 System Setup
4.1 Basic Configuration
Basic configuration includes three sub menus: system, date & time and DST.
4.1.1 System
Step1: Enter into Menu
Æ
Setup
Æ
Basic
Æ
System. Refer to Fig 4-3:
Step2: In this interface you can setup the device name, device ID, video format, max
network user, VGA resolution and language. The definitions for every parameters
display as below:
Device Name:
The name of the device as it may display on the client end or on
CMS, this would help the user to recognize the device remotely.
Device ID:
This ID is used to map the DVR with IR remote controller and speed
dome cameras.
Video Format:
Two modes: PAL and NTSC. User can select the video format
according to the cameras being used. Fig 4-3 Basic Configuration-Basic
Password Check:
If enabled
the user would need to input the user name and the password for performing corresponding
