4
MEDIAPLAYER
1. USB SLOT
You can play media files from a USB device by
connecting the device to this slot
2. DISPLAY
The display shows multiple forms of information, for
example current MODE, elapsed time, etc
3. MODE BUTTON
Press to change modes between playing AUX,
USB, MP3 and BT
4. PLAY/PAUSE BUTTON
Press this button to start or pause play
5. FOLDER BUTTON
Press this button to enter FOLDER selection
6. PREVIOUS BUTTON
Press this button to go to the previous track. Press
and hold to scan backwards within tracks
7. NEXT BUTTON
Press this button to go to the next track.
Press and hold to scan forwards within tracks
CONNECTING WITH BT
1. Activate the BT-function on your device (Mobile phone, tablet etc.) from which you want to play the
music. See the operating instructions for that device.
2. Press the
“BT” button and activate BT-function.
3. Select
“VONYX” on your BT-device and make the BT-connection
If password is required, you can enter "0000".
Attention:
The BT distance is approx. 10 meter without any barrier.
REMOTE CONTROL
1. Power Switch
Switch to turn the device ON or OFF.
2. Mode Switch
Press to change modes.
3. Mute
Press to (un)mute the device.
4. Equalizer
Press to change equalizer modes.
5. Master Volume Up
Press to raise volume.
6. Previous Track
Press to choose previous track.
7. Play / Pause
Press to start/resume or pause play.
8. Next Track
Press to choose next track.
9. Master Volume Down
Press to decrease volume.
10. Repeat
Press to select repeat single track or repeat full folder.
11. Numpad
REPLACING THE FUSE
If the fuse is defective, replace the fuse with a fuse of the same type and value. Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuse holder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuse holder.
Step 3: Install the new fuse in the fuse holder.
Step 4: Replace the fuse holder in the housing.