Vonyx 178.130, Instruction Manual

Page: 3 / 20

3
UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
POWERSUPPLY
On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains
voltage corresponds to this, all other voltages than specified, the product be irreparably damaged. The product must also be
directly connected to the mains and may be used. No dimmer or adjustable power supply.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or fire.
CONTROLS AND CONNECTIONS
1. Microphone Level Channel 2
Adjust the signal level of microphone channel 2.
2. Microphone Level Channel 1
Adjust the signal level of microphone channel 1.
3. Microphone Echo
Adjust the intensity of the echo effect.
4. Input selector switch
Selects the input signal:
• Button not pressed: signal of media player.
• Button pressed: signal of the line input.
5. Equalizer
5-band equalizer for the master signal. Adjust
frequencies are 100Hz, 300Hz, 1kHz, 3kHz,
10kHz.
6. Microphone Input Channel 1
XLR input jack for connecting a microphone.
7. Microphone Input Channel 2
6.3mm ¼” input jack for connecting a microphone.
8. Line In-/ Output
RCA jack in- and output for connecting audio units
with line level output (e.g. mixer, CD player, tape
recorder).
9. AUX Input
3.5mm jack input for connecting units with line
level (e.g. CD/MP3/DVD player, hi-fi system, PC).
10. Input selector switch
Selects the input signal:
• Button not pressed: signal of the line input.
• Button pressed: signal of media player.
11. Volume
Adjust the overall output level of the portable
sound system.
12. Mode button
Press the button to select BT/USB/SD function.
Press for 2 seconds to turn the mediaplayer on or
off.
13. Backward button
Press key for select last title (short actuation) and
decrease volume (long actuation).
14. Forward button
Press key for select next title (short actuation) and increase volume (long actuation).
15. Repeat button
Press key for repeating of single track or all tracks.
16. Play button
For switching between play and pause.
17. LCD Display
Display show you some information as playback support, file name, elapsed time, total time, file number, total file
number, file and playback mode.