VONROC PS503 Series, Original Instructions Manual

Page: 7 / 32

EN
7
WWW.VONROC.COM
Assembling the upper handle (Fig. E1, E2, E3, E4,
E5)
1. Attach the upper handle (1) to the lower handle
(2) (Fig. E1)
2. Use the supplied knobs (3) and bolts (7) to
fixate the upper handle (Fig E2, E3 / E4, E5).
Note that there are two possible height options
for the upper handle.
4. OPERATION
Be careful during operation of the
appliance. The underside of the sweeper
contains moving parts such as belts,
pulleys and brushes which will start moving
when the sweeper is pushed along.
Adjusting the handle (Fig. F1, F2, F3, F4, F5)
1. Loosen the knobs (3) on both sides of the
handle. Note: the knobs need only be loosened
to allow some movement of the handle. Do not
completely remove the knobs (3) and bolts (7)
from the sweeper. (Fig. F1)
2. Pull the handle up slightly, then adjust the
handle to the desired position. Push the handle
down slightly to secure it in one of the two
possible positions. (Fig. F2, F3 / F4, F5)
3. Fasten the knobs (3) to fixate the handle
Emptying the container (Fig. G)
1. Remove the container (5) by pulling the handle
2. Empty the contents of the container in a suita-
ble waste bin
3. Place the container (5) back onto the sweeper
Folding the handle for storage (Fig. H1, H2, H3, H4)
1. Loosen the knobs (3) on both sides of the
handle. Note: the knobs need only be loosened
to allow some movement of the handle. Do not
completely remove the knobs (3) and bolts (7)
from the sweeper. (Fig. H1)
2. Pull the handle up slightly, then move the hand-
le forwards to fold it onto the sweeper. (Fig. H2)
3. Fasten the knobs (3) to fixate the handle in the
folded position (Fig. H3)
4. With the handle folded down the sweeper can
be easily stored in vertical position (Fig. H4)
5. MAINTENANCE
This sweeper has been designed to operate over
a long period of time with a minimum of mainte-
nance.
Continuous satisfactory operation depends upon
proper care and regular cleaning.
• Keep the sweeper clean and dry.
• Regularly remove stuck debris from the brushes
• To clean the sweeper, use only mild soap
and a damp cloth. Do not use any abrasive or
solvent-based cleaner. Do not immerse the
sweeper in water.
WARRANTY
VONROC products are developed to the highest
quality standards and are guaranteed free of
defects in both materials and workmanship for the
period lawfully stipulated starting from the date of
original purchase. Should the product develop any
failure during this period due to defective material
and/or workmanship then contact VONROC directly.
The following circumstances are excluded from this
guarantee:
• Repairs and or alterations have been made
or attempted to the machine by unauthorized
service centers;
• Normal wear and tear;
• The tool has been abused, misused or im-
properly maintained;
• Non-original spare parts have been used.
This constitutes the sole warranty made by compa-
ny either expressed or implied. There are no other
warranties expressed or implied which extend
beyond the face hereof, herein, including the im-
plied warranties of merchantability and fitness for
a particular purpose. In no event shall VONROC be
liable for any incidental or consequential damages.
The dealers remedies shall be limited to repair or
replacement of nonconforming units or parts.
The product and the user manual are subject to
change. Specifications can be changed without
further notice.