6
EN
WWW.VONROC.COM
SAFETY WARNINGS FOR JIG SAWS
•
Hold the power tool by insulated gripping surfa
ces, when performing an operation where the
cutting accessory may contact hidden wiring
or its own cord.
Cutting accessory contacting
a “live” wire may make exposed metal parts of
the power tool “live” and could give the opera-
tor an electric shock.
•
Keep hands away from the sawing range. Do
not reach under the workpiece.
Contact with
the saw blade can lead to injuries.
•
Apply the machine to the workpiece only when
switched on.
Otherwise there is danger of kick-
back when the cutting tool jams in the workpiece.
•
Pay attention that the base plate rests securely
on the material while sawing.
A jammed saw
blade can break or lead to kickback.
•
When the cut is completed, switch off the
machine and then pull the saw blade out of the
cut only after it has come to a standstill.
In this
manner you can avoid kickback and can place
down the machine securely.
•
Use only undamaged saw blades that are in
perfect condition.
Bent or dull saw blades can
break, negatively influence the cut, or lead to
kickback.
•
Do not brake the saw blade to a stop by applying
side pressure after switching off.
The saw blade
can be damaged, break or cause kickback.
•
Use appropriate detectors to determine if utility
lines are hidden in the work area or call the lo
cal utility company for assistance.
Contact with
electric lines can lead to fire and electric shock.
Damaging a gas line can lead to explosion. Pe-
netrating a water line causes property damage.
•
Use clamps or another practical way to secure
and support the workpiece to a stable platform.
Holding the workpiece by hand or against your
body leaves it unstable and may lead to loss of
control.
•
Always wait until the machine has come to a
complete stop before placing it down.
The tool
insert can jam and lead to loss of control over
the power tool.
2. MACHINE INFORMATION
Intended use
The machine is intended for sawing wood, metal,
plastics, ceramics, rubber, etc. to any required
size and in any required shape, while keeping
the baseplate resting firmly on the workpiece.
A suitable saw blade must always be used.
TECHNICAL SPECIFICATIONS
Model No.
JS503AC
Voltage
230-240V~
Frequency
50Hz
No load speed
0-3000/min
Max. saw capacity wood 0°
65mm
Max. saw capacity steel 0°
6mm
Weight
1.85 kg
Sound pressure level L
PA
95 dB(A), K=3dB(A)
Sound power level L
WA
96 dB(A), K=3dB(A)
Vibration ‘sawing sheet metal’ 10.08 m/s
2
K=1.5 m/s
2
Vibration ‘sawing plywood’
9.19 m/s
2
K=1.5 m/s
2
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
with a standardised test given in EN 62841; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned:
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
- the times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work patterns.
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2 and 3.
1. On/off switch
2. Dust blower switch
3. Main handle
