EN
11
WWW.VONROC.COM
speed setting” below to determine the correct
speed, based on the material being worked on and
the type of accessory being used. This overview
enables you to select both correct accessory and
the optimum speed.
The 5 speeds indication lights (6) are equal to
the numbers 1, 2, 3, 4 and 5 in the overview
“Recommended speed setting”.
Ultimately, the best way to determine the correct
speed for work on any material is to practice on a
piece of scrap.
RECOMMENDED SPEED SETTING
Grinding stones
(
Fig. D)
Material
Speed setting
Stone, shell
1-3
Steel
3-5
Aluminium, brass
2-4
Plastic
1-3
Felt wheels and tip
(
Fig. E)
The felt wheels or tip should be screwed on the
mandrel.
Material
Speed setting
Steel
3-5
Aluminium, brass
2-4
Plastic
3-5
Sanding bands and disc (sanding disc not included)
(Fig. F)
Material
Speed setting
Wood
4-5
Steel
1-3
Aluminium, brass
2-4
Plastic
1-3
Bristel brush
(
Fig. G)
Material
Speed setting
Stone, shell
2-4
Aluminium, brass
2-4
High speed cutter, Diamond wheel point and Drill
(Fig. H)
Material
Speed setting
Stone, shell
5
Steel
2-4
Aluminium, brass
4-5
Plastic
1-3
Abrasive disc
(
Fig. I)
Material
Speed setting
Steel
3-5
Aluminium, brass
2-4
Plastic
1-3
5. MAINTENANCE
Make sure that the machine is not live when
carrying out maintenance work on the motor.
Keep the ventilation slots of the machine clean to
prevent overheating of the engine. Regularly clean
the machine housing with a soft cloth, preferably
after each use. Keep the ventilation slots free from
dust and dirt. If the dirt does not come off use a
soft cloth moistened with soapy water. Never use
solvents such as petrol, alcohol, ammonia water,
etc. These solvents may damage the plastic parts.
Please clean the tool immediately after use.
ENVIRONMENT
Damaged and/or disposed of electrical or
electronic devices must be dropped off at
recycling stations intended for that purpose.
Only for EC countries
Do not dispose of power tools into domestic
waste. According to the European Guideline
2012/19/EU for Waste Electrical and Electronic
Equipment and its implementation into national
right, power tools that are no longer usable must
be collected separately and disposed of in an
environmentally friendly way.
