CLEANING THE FILTERS
To gain access to the Fabric Filter and HEPA Filter you
will need to remove the Motor Unit.
Follow the steps shown in “
Emptying the Ash
Vacuum
” on page 4.
Remove the Fabric Filter lift away from the Container,
rinse under clean running water.
CAUTION:
Do not use the Ash Vacuum without the
HEPA Filter in place.
CAUTION:
Do not use the Ash Vacuum with wet
Filters in place this will damage the product.
Leave to completly dry for 24hrs.
Locate the HEPA Filter on the underside of the Motor
Unit.
Gently pull and twist to remove the Filter.
Clean the HEPA Filter from the inside outwards; this
will ensure effecient removal of debris.
Use clean running water to clean the filter, do not use
any harsh abrasives or detergents to clean the filter.
Leave to completly dry for 24hrs.
CAUTION:
Do not use the Ash Vacuum without the
HEPA Filter in place.
CAUTION:
Do not use the Ash Vacuum with wet
Filters in place this will damage the product.
WARNING! Ensure you have switched off and unplugged from the mains supply before performing
any maintenance or cleaning of the appliance.
