WARNING
PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE
glasses.
WARNING!
Wearing glasses or goggles
not in compliance with ANSI Z87.1 when
operating this tool could cause serious
injury.
Dress appropriately. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
parts to prevent them from becoming
caught in the tool.
Remove any adjusting key or wrench
before turning the power tool on. A
wrench or key left attached to a rotating
part of the power tool may result in
personal injury.
If devices are provided for the connection
of dust extraction and collection facilities,
ensure that these are connected and
properly used to reduce dust-related
hazards.
Use clamps, or another practical way, to
secure and support the workpiece to a
stable platform. Holding the workpiece
by hand or against your body leaves it
unstable and may lead to loss of control.
Make sure that there are no nails or
foreign objects in the path of the
workpiece to be cut or sanded.
Be aware of hidden hazards. Before
cutting into walls, floors or ceilings, check
for the location of wiring and pipes.
Prevent unintentional starting. Ensure
the switch is in the off position before
connecting to the power source and/
or battery pack, picking up or carrying
the tool. Carrying power tools with
your finger on the switch, or energising
power tools that are switched on, invites
accidents.
POWER TOOL USE AND CARE.
Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
WARNING!
Only use accessories
recommended for use with this Angle
Grinder. Follow the instructions that
accompany the accessories. The use of
improper accessories may result in injury
to the operator or damage the tool.
Do not use the power tool if the switch
does not turn it on and off. A power tool
that cannot be controlled with the switch
is dangerous and must be repaired.
Stay alert, watch what you are doing and
use common sense when operating a
power tool.
Do not use a power tool whilst tired or
under the influence of drugs, alcohol or
medication. A moment of inattention
while operating a power tool may result
in serious personal injury.
Hold the power tool by insulated gripping
surfaces when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord. A cutting
accessory contacting a “live” wire may
make exposed metal parts of the power
tool “live” and could give the operator an
electric shock.
Keep hands away from the cutting area.
Never reach underneath the workpiece
for any reason. Do not insert fingers or
thumb into the vicinity of the blades/
sanding attachments. Do not stabilise the
Angle Grinder by gripping the shoe.
Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job
better and safer at the rate for which it
was designed.
Do not overreach. Keep proper footing
and balance at all times. This will enable
