WARNING
PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE
WARNING!
Read all safety warnings
and all instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
Please retain all warnings and instructions
for future reference.
The term “power tool” in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
INTENDED USE.
Only use the Angle Grinder as described
in this manual. The use of any accessory
or attachment or performance of any
operation with this tool other than those
recommended in this instruction manual
may present a risk of personal injury and/
or damage to property.
This tool is not intended for use by
persons with reduced physical, sensory or
mental capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instructions
concerning use of the tool by a person
responsible for their safety.
Children should be supervised to ensure
they do not play with the tool.
ELECTRICAL SAFETY.
Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if
your body is earthed or grounded.
Do not expose power tools to rain or wet
conditions. Water entering the power tool
will increase the risk of electric shock.
WORK AREA SAFETY.
Keep your work area clean and well lit.
Cluttered or dark areas invite accidents.
Do not operate power tools in explosive
atmospheres such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.
Keep bystanders, children and animals
away while operating the power tool.
Distractions can cause you to lose control.
BEFORE USE.
WARNING!
Know your Angle Grinder. Do
not plug the tool into the power source
until you have read and understood the
information in this manual. Learn the tool’s
applications and limitations, as well as the
specific potential hazards related to this
tool, in order to reduce the risk of electric
shock, fire or serious injury.
WARNING!
If any part is missing or
damaged, do not plug the tool into the
power source or install any accessory
until the missing or damaged part is
repaired or replaced. Failure to follow this
instruction could result in serious personal
injury.
Use personal protective equipment.
Always wear eye protection. Protective
equipment such as a dust mask, non-
skid safety shoes, hard hat, or hearing
protection used for appropriate
conditions will reduce the risk of personal
injury.
WARNING!
Contact with, or inhalation
of, dusts arising from cutting applications
may endanger the health of the operator
and possible bystanders. Wear a dust
mask specifically designed for protection
against dust and fumes and ensure that
persons within or entering the work area
are also protected.
Always wear eye protection. Any power
tool can throw foreign objects into your
eyes and cause permanent eye damage.
Always wear safety goggles (not glasses)
that comply with ANSI safety standard
Z87.1. Everyday glasses have only impact-
resistant lenses. They are not safety
1
