TROUBLESHOOTING
PROBLEM
SOLUTION
THE TOOL WILL NOT START
THE TOOL KEEPS KICKING/STALLING
EXCESSIVE VIBRATION
EXCESSIVE NOISE
THE TOOL IS OVERHEATING
Ensure the tool is connected to mains
power.
Activate the ON/OFF Switch.
Check the fuse and replace if required.
Dangerous restart may have been
activated.
Relieve some pressure on the tool. Do not
exert extra force, let the tool do the job.
The material is too thick and is placing
strain on the motor.
If excessive noise continues, discontinue
use and seek repairs.
Too much force is being exerted on the
tool. Use less force.
Allow the tool to cool before using again.
If you are having difficulty using this product and require support,
please contact
