MAINTENANCE
TROUBLESHOOTING
PROBLEM
SOLUTION
Ensure the tool is switched on and connected to
mains power.
Activate the
On/Off Trigger
to power on.
Check the fuse and replace if necessary.
TOOL DOES NOT POWER ON
BLADE DOES NOT MOVE
POOR CUTTING PERFORMANCE
MOTOR BECOMES HOT
BLADE IS JUDDERING OR
VIBRATING ABNORMALLY
The tool has been heavily used. Reduce the force
applied to the tool. Do not exert extra pressure, let the
tool do the work.
Air vents may have become blocked. Clean the air vents
using compressed air or a clean dry cloth.
The blade is not mounted correctly. Check the blade
and replace if necessary.
Machine bearings may be worn. Contact DOMU Brands
Customer Services.
CAUTION
Ensure the 800W Reciprocating Saw is
disconnected from the mains power supply before
attempting any maintenance.
Keep the tool’s ventilation slots clean and free from
obstructions. If available, blow compressed air into
the vents to clear any internal dust.
IMPORTANT
Safety goggles must be worn when
undertaking this task.
Keep the outer casing of the appliance clean and free
from grease.
CAUTION
Do not wash with water or use solvents
or abrasives. Use only mild soap and a damp cloth to
clean the tool.
Always store your appliance in a cool, dry place, out
of reach of children.
Drive gear may be broken. Contact DOMU Brands
Customer Services.
The blade may be damaged and will require changing
as outlined in the
‘Fitting a Saw Blade’
section.
The blade may not be suitable for the material used.
WARNING!
Do not allow water or any
other liquid to enter the tool. Never
immerse any part of the tool in a liquid for
any reason.
If you are having difficulty using your product and require support, please
contact
Summary of Contents for 3500014
Page 1: ...800W RECIPROCATING SAW 3500014 Instruction Manual...
Page 13: ...USER NOTES...
