background image

WARNING

PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE

3

supplied as this is potentially dangerous.
Do not plug anything other than the 
supplied battery into the charger as other 
objects may touch dangerous voltage 
points or short out parts which may result 
in fire or electric shock.
Before using the charger, read all 
instructions, labels and cautionary 
markings on the charger and battery, 
as well as the instructions on using the 
battery.
Do not use the charger if it has been 
subjected to a heavy knock, dropped or 
otherwise damaged in any way. Take the 
charger to an authorised service centre 
for it to be checked and repaired.

DANGER!

 If the battery is cracked or 

damaged in any way, do not insert it into 
the charger.
Do not attempt to disassemble the 
charger. Opening or removing covers 
may expose you to dangerous voltages 
or other risks. Incorrect reassembly may 
result in the risk of fire or electric shock. 
If there is a problem with the battery or 
tool, take it to your nearest authorised 
service centre.
Take the tool or charger to your nearest 
authorised service centre:
If liquid has been spilled into the tool or 
charger, or if rain or water has touched 
the tool or charger.
If the tool or charger does not operate 
normally after you follow the operating 
instructions.
If the tool or charger exhibits a distinct 
degradation in performance.
If the tool or charger is damaged in any 
way.
If the battery is not charged within the 
time frame as specified in this manual, 
turn the charger off.
Use the battery charger indoors only.
Do not place the tool or charger on an 

uneven surface as a fall may cause serious 
damage.
Do not operate the charger in a cabinet 
or other enclosure unless proper 
ventilation is provided.
Never place the tool or charger near or 
over a heat source such as radiator or 
heater.
Do not charge batteries or use the 
tool and battery in locations where the 
temperature may be below 0°C, or 
above 40°C such as inside sheds or metal 
structures.
The battery can be charged or operated 
at temperatures between 0°C and 40°C.

WARNING! 

Never charge your Lithium-

ion battery below or above temperatures 
recommended as this may result in fire or 
serious damage to the battery.
The most suitable temperatures to charge 
the battery are between 20°C and 25°C.
Do not place any object onto the charger 
or allow any object to rest on the charger.
Make sure that the charger cable is 
positioned where it will not be stepped 
on, tripped over or otherwise subjected 
to damage or stress. Keep the lead away 
from operating machinery.
Do not use an extension cord unless 
absolutely necessary. The use of an 
improper extension cord could result in 
fire or electric shock.
Never attempt to connect two chargers 
together.

WARNING! 

Do not allow water or any 

other liquid to come into contact with 
the charger as this may result in electric 
shock. Do not position the tool or battery 
charger near water. Take care not to spill 
liquid of any kind on the tool or charger.
To reduce the risk of electric shock, 
unplug the charger from the power 
supply before attempting to clean it. To 
clean the tool or charger, wipe with a 

Summary of Contents for 3500006

















Reviews: