8
2
Tape and mark area being cut.
3
Cut device square.
4
Slide anti-rattle clip into device.
1
Measure amount to cut off device.
Anti-rattle
clip inside
2”
min.
OPTIONAL EQUIPMENT - CONTINUED
1.
Remove mortise cylinder cam and reinstall in reverse (Figure 1).
2.
Insert key and rotate cam to install the cylinder to the cover plate
(Figure 2).
3.
Remove key to slide cover plate in position in the mechanism case.
Std. mortise
cylinder
Mortise
cylinder
cam
Std. mortise
cylinder
Mortise
cylinder
cam
CD function conversion
Figure 1
Figure 2
Std. mortise
cylinder
Cylinder
collar
Dogging
plate cover
Offset toward
pushbar
Cylinder
locating washer
Cylinder
lock nut
Mechanism
case
Turn cylinder key clockwise approx. 1/8
turn for standard dogging
Dogging procedure
Depress pushbar
CD (CYLINDER DOGGING)
CUT DEVICE
5/16”
1-1/2” minimum clearance
(with endcap removed)
Device aligned
with mounting
holes
Tape
Cover plate
(flush to pushbar)
Pushbar
Remove anti-rattle clip
Cut device
square
and remove all
burrs
NOTE: Device must
be cut
square
for
proper end cap fit
Note
If 5/8” diameter wire access hole
has been predrilled in door, cut
device 5/16” from center of hole.
