Assembly manual
23
22
13.
Fasten coverage over
all bottom elements 2 in
accordance with Fig. 28.
14.
Insert wire rotator
for door closing in free
holes through elements
12 and 17 by straight
end from inside.
The rotator should
lean element 12 by
incurved part (Fig. 30).
Figure29
In this position, use a
pipe to bend linear part
by hand into opposite
direction (Fig.31). Install
the rotator on elastic
headers (Fig. 32). Such
a construction provides
elastic tightness of the
door in closed state both
from inside and outside
of the greenhouse.
Cutting and fastening of end coverage
Figure30
Figure31
Figure32
17
17
bending pipe
bending pipe
12
20
15.
Wire rotator for small window locking is mounted like a door rotator.
rotator
rotator
handle
- washers
