Volvo XC90 Hybrid 2016, Owner'S Manual

Page: 118 / 546

INSTRUMENTS AND CONTROLS
116
Resetting user data when the
vehicle changes owners
When the vehicle changes owners, all user set-
tings should be reset to the factory defaults.
When the vehicle changes owners, it is essential
to reset all user data and system settings to their
factory defaults, including Volvo On Call.
Related information
•
Resetting the settings view (p. 115)
•
Volvo ID (p. 31)
Ambient temperature sensor
The ambient temperature sensor displays the
temperature outside the vehicle in the instrument
panel.
Location of the ambient temperature sensor in 12"
(upper) and 8" (lower) instrument panels (temperature
shown here in degrees Celsius)
NOTE
When the ambient temperature is between
23° and 36 °F (–5° and +2 °C), a snowflake
symbol will be displayed next to the tempera-
ture. This symbol serves as a warning for pos-
sible slippery road surfaces. Please note that
this symbol does
not
indicate a fault with your
vehicle.
At low speeds or when the vehicle is not mov-
ing, the temperature readings may be slightly
higher than the actual ambient temperature.
Settings
Changing measurement standard in the center
display:
1. Pull down the center display's Top view and
tap
Settings
.
2. Tap
System Units
.
3. Select measurement standard,
Metric
,
Imperial
or
US
.
Related information
•
Instrument panel (p. 127)
•
Climate system sensors (p. 179)