Volvo XC90 Hybrid 2016, Owner'S Manual

Page: 143 / 546

INSTRUMENTS AND CONTROLS
}}
* Option/accessory, for more information, see Introduction. 141
Position Result
With the ignition in mode II or if
the engine is running:
•
In the
US
: the Daytime Run-
ning Lights (DRL) will be
off
•
In
Canada
: the Daytime Run-
ning Lights will be
on
•
High beam flash can be used
With the ignition in mode II or if
the engine is running:
A
•
In the
US
: the Daytime Run-
ning Lights will be
off
•
In
Canada
: the Daytime Run-
ning Lights will be
on
•
High beam flash can be used
With the ignition in mode II or if
the engine is running:
•
The Daytime Running Lights
will be
off
•
The low beam headlights will
be
on
•
High Beams/High Beam flash
can be used
Position Result
With the ignition in mode II or if
the engine is running:
•
The Daytime Running Lights
will be
on B
(the low beam
headlights will automatically
switch on in dark conditions or
if the rear fog lights are on
•
Tunnel detection
*
will be acti-
vated
•
Active High Beams (AHB) can
be activated
•
High beam flash can be used
Active High Beams On/Off
A
The parking lights will be on in this position, even if the ignition
is switched off. In dark conditions, the rear parking lights illumi-
nate automatically when the tailgate is open, regardless of the
control's position or ignition mode.
B
US models only: The use of Daytime Running Lights can be
activated/deactivated in the center display's Settings menu.
NOTE
The use of Daytime Running Lights is recom-
mended in the United States and is
manda-
tory in Canada
.
Volvo recommends using the position
whenever possible.
WARNING
•
Daytime Running Lights are a driving aid
designed to help make the vehicle visible
to other roads users.
•
The driver is always responsible for
adapting the use of Daytime Running
Lights/headlights according to ambient
lighting and weather conditions.
Lighting panel
Instrument lighting
Thumb wheel (to the left) for adjusting display bright-
ness
Illumination of the display and instrument lights
will vary, depending on ignition mode.
The display lighting is automatically subdued in
darkness and the sensitivity is set with the thumb
wheel.