Volvo XC60 Twin Engine 2020, Owner'S Manual

Page: 587 / 714

WHEELS AND TYRES
}}
* Option/accessory. 585
Wheel bolts
Wheel bolts are used to attach the wheels to
the hubs.
Only use rims that are tested and approved by
Volvo and which are Volvo genuine accesso-
ries.
Check the tightening torque of the wheel bolts
with a torque wrench.
Do not use lubricant on the threads of the
wheel bolts.
WARNING
The wheel bolts may need to be re-tight-
ened several days after the change. Tem-
perature differences and vibration may
mean that they are not attached equally as
tightly.
IMPORTANT
The wheel bolts must be tightened to
140 Nm. (103 foot-pound). Overtightening
or loose tightening may damage the nuts
and the bolts.
Locking wheel bolts
*
In the foam block under the cargo area floor
there is space for the sleeve for the lockable
wheel bolts.
Related information
•
Removing a wheel (p. 585)
•
Fitting the wheels (p. 587)
Removing a wheel
Wheel changes must always be performed
correctly. Instructions on how a wheel is
undone and what is important to remember
are provided below.
IMPORTANT
•
When the jack
*
is not in use it must be
stored in its storage space under the
cargo area floor.
•
The jack included with the car is only
designed for occasional, short-term
use, such as when changing a wheel
after a puncture. Only the jack belong-
ing to the specific model is to be used
to jack up the car. If the car is to be
jacked up more often, or for a longer
time than is required just to change a
wheel, use of a garage jack is recom-
mended. In this instance, follow the
instructions for use that come with the
equipment.