Volvo XC 60, Owner'S Manual

Page: 231 / 422

07 Driver support
07
*
Option/accessory, for more information, see Introduction.
229
•
On at start-up
- The function enters
standby mode every time the engine is
started. Otherwise the same value as
when the engine was switched off is
obtained.
•
Increased sensitivity
- The sensitivity
increases, an alarm is triggered earlier
and fewer limitations apply.
Related information
•
Lane Departure Warning (LDW)* (p. 228)
•
Lane Departure Warning (LDW) - limita-
tions (p. 230)
•
Lane Departure Warning (LDW) - opera-
tion (p. 229)
•
Lane Departure Warning (LDW) - symbols
and messages (p. 231)
Lane Departure Warning (LDW) -
operation
LDW is complemented in the combined
instrument panel with intuitive graphics in dif-
ferent situations. Here are some examples:
The LDW function's side lines (marked in red in
the figure).
•
The LDW symbol has WHITE side lines -
the function is active and detects/"sees"
one side line, or both.
•
The LDW symbol has GREY side lines -
the function is active but detects neither
left nor right side line.
or
•
The LDW symbol has GREY side lines -
the function is in standby mode because
the speed is below 65 km/h.
•
The LDW symbol has no side lines - the
function is deactivated.
Related information
•
Lane Departure Warning (LDW)* (p. 228)
•
Lane Departure Warning (LDW) - limita-
tions (p. 230)
•
Lane Departure Warning (LDW) - function
(p. 228)
•
Lane Departure Warning (LDW) - symbols
and messages (p. 231)