Volvo XC 60 TWIN ENGINE, Owner'S Manual

Page: 138 / 620

||
INSTRUMENTS AND CONTROLS
* Option/accessory. 136
Position Specification
Daytime running lights and position
lamps.
Dipped beam and position lamps in
weak daylight or darkness, or when
the front fog lamp
* and/or rear fog
lamp are activated.
The Active main beam function can
be activated.
Main beam can be activated when
dipped beam is switched on.
Main beam flash can be used.
Active main beam on/off.
A Also at stationary when the car is running, provided that the
rotating ring is moved to this position from another position .
Volvo recommends that mode is used
when the vehicle is driven.
WARNING
The car's audio system is not able to deter-
mine when daylight is too weak or sufficiently
strong, e.g. in fog and rain, in all situations.
The driver is always responsible for ensuring
that the car is driven with a beam pattern suit-
able for the traffic situation and in accordance
with applicable traffic regulations.
Thumbwheel in the instrument panel
Thumbwheel (to left) for adjusting brightness.
A car with LED
17
headlamps
*
has automatic
headlamp levelling and therefore does not have
the thumbwheel for headlamp levelling.
Adjusting the interior brightness
The lamps inside the car come on differently
depending on the ignition position used.
The thumbwheel adjusts the brightness of display
lighting, control lighting, ambient light and ambi-
ence light
*
.
Related information
•
Passenger compartment lighting (p. 144)
•
Activating/deactivating main beam (p. 138)
•
Ignition positions (p. 403)
•
Position lamps (p. 136)
Position lamps
The position lamps are switched on with the
rotating ring on the stalk switch.
Stalk switch rotating ring in position lamps position.
Turn the rotating ring to the position - the
position lamps are switched on (number plate
lighting is switched on at the same time).
If the tailgate is opened when it is dark outside,
the rear position lamps come on (if not already
switched on) to warn road users approaching
from behind. This takes place irrespective of the
position of the rotating ring or the ignition posi-
tion of the car's electrical system.
When driving for more than 30 seconds at max.
10 km/h (approx. 6 mph), or if the speed
exceeds 10 km/h (approx. 6 mph), the daytime
17 LED (Light Emitting Diode)