MAINTENANCE AND LUBRICATION 437
CAUTION
Attempting to work on electronic
components without proper equipment
can damage internal parts with static
electricity.
CAUTION
Today’s vehicles contain a high number
of electronic devices. It is very
important to exercise caution when
working on a modern electrical system,
charging batteries or jump starting the
engine. To minimize the risk of any
damage to the electronic components,
follow the procedures below when work
is being done to the electrical system.
CAUTION
Welding on the vehicle can damage the
electrical system or components due
to the high voltage and current spikes
that normally occur when welding. It
is preferable to avoid welding on an
assembled vehicle. However, if any
structure on or in contact with the
vehicle must be welded, follow the
recommendations below.
CAUTION
If there are other ground cables
connected to the battery (such as
engine ECU, transmission ECU,
etc.), disconnect those wires first,
then remove the main battery ground
cable. Electronic modules may be
damaged when their ground(s) are
connected/disconnected with the main
battery ground disconnected. Therefore,
disconnect the main battery ground last
or when installing, connect the main
ground first.
Summary of Contents for VN
