13
J8200244
Remove the bonnet catch screws
Remove the bonnet catch.
14
J8000366
Unplug the pre-routed connector from the parking module in the
bonnet catch by pressing in the catch and pulling.
Place the bonnet catch to one side, it shall not be used again.
15
J8000364
Take the new bonnet catch from the kit and secure it with the
existing screws.
Torque tighten the screws to 24 Nm (18 lbf.ft.).
Plug the bonnet catch's connector (1) into the pre-routed
connector (2).
Secure the wire and the sleeve in the new bonnet catch.
Reinstall the panel above the bonnet catch.
Reinstall the intake manifold.
Reinstall the bumper cover using the five clips and the two
screws in the upper edge.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Alarm, basic kit- 30772159 - V1.1
Page 10 / 11
