2005 Volvo S40
Reinserting the key blade in the remote control
●
Hold the remote control with the pointed end down.
●
Carefully slide the key blade into its groove.
●
Gently press the key blade in the groove until it clicks into place.
The doors can be locked or unlocked using the detached key blade.
●
Turn the key in the driver's door lock once to unlock the driver's door only.
●
Turn the key again (within 10 seconds) to unlock the other doors and the trunk.
●
One turn with the key toward lock in the driver's door locks all doors and the trunk.
Valet or service locking
By utilizing the remote control with the key blade removed, the valet locking feature enables you to
block access to the trunk and glove compartment for e.g. valet parking or when the car is brought to the
retailer for service.
pg. 91 Remote control and key blade
With the valet locking function activated:
●
The vehicle's doors can be locked or unlocked
●
The engine can be started
●
The glove compartment cannot be unlocked
●
Access to the trunk is blocked (the trunk lid cannot be unlocked or opened, and the rear seat backrests
are locked in the upright position)
To activate the valet locking function:
1. Remove the key blade from the remote control
2. Turn the key blade 180° clockwise in the glove compartment lock to activate the function. (A message
appears in the information display.)
3. Give the parking attendant or service personnel only the remote control (with the key blade removed)
Turn the key blade 180° counterclockwise in the glove compartment lock to deactivate valet locking.
http://new.volvocars.com/ownersdocs/2005/2005_S40/05s40_06a.htm (5 of 11)8/12/07 12:17 AM
