2005 Volvo S40
A - ball holder (1 7/8" ball), B - locking bolt, C - cotter pin, D - hitch assembly, E - safety wire
attachment
Installing the ball holder
1. If necessary, remove the cotter pin from the locking bolt and slide the locking bolt out of the hitch
assembly.
2. Slide the ball holder into the hitch assembly.
3. Align the hole in the ball holder with the one in the hitch assembly.
4. Slide the locking bolt through the hitch assembly/ball holder.
5. Insert the cotter pin in the hole at the end of the locking bolt.
Removing the ball holder
1. Remove the cotter pin from the locking bolt and slide the locking bolt out of the ball holder/hitch
assembly.
2. Pull the ball holder out of the hitch assembly.
NOTE: A cover for the hitch assembly is also included in the kit.
pg. 122 Transporting loads
Transporting loads
Loading the car
Your vehicle's load-carrying capacity is affected by factors such as:
●
the number of passengers
●
tire inflation
●
the amount of optional or accessory equipment installed
●
the amount of cargo
See the chapter "Wheels and tires" for more detailed information.
http://new.volvocars.com/ownersdocs/2005/2005_S40/05s40_07b.htm (14 of 15)8/12/07 12:17 AM