||
DRIVER SUPPORT
308
If City Safety has prevented a collision, the vehi-
cle will be kept at a standstill until the driver
takes action. If the vehicle has slowed to avoid
colliding with the vehicle ahead, your speed will
be reduced to that vehicle's speed.
When auto-brake is triggered, the seat belt pre-
tensioners may also be activated, see the article
"Seat belts" for additional information.
Auto-braking can be cancelled if the driver
presses hard on the accelerator pedal.
When City Safety applies the brakes, the brake
lights will illuminate.
When City Safety is triggered and applies the
brakes, a text message will be displayed in the
instrument panel.
Related information
•
•
City Safety in crossing traffic (p. 311)
•
City Safety limitations (p. 314)
•
City Safety symbols and messages (p. 317)
•
Detecting obstructions with City Safety
(p. 309)
•
Rear Collision Warning (RCW) (p. 318)
•
City Safety warning level settings (p. 308)
•
City Safety in crossing traffic (p. 311)
•
•
City Safety when evasive action is not possi-
ble (p. 312)
City Safety warning level settings
City Safety is always activated but the function's
warning distance can be adjusted.
City Safety cannot be turned off and activates
automatically each time the engine/electric
motor is started.
Setting a warning level (distance)
The distance set for warnings determines the
system's responsiveness and sets the distance at
which visual, audible and tangible (haptic) warn-
ings will be triggered.
To do so:
1. Tap
Settings
in the center display's Top
view.
2. Tap
My Car
IntelliSafe
City Safety
.
3. Choose among
Earlier
,
Normal
or
Later
.
Begin by choosing
Earlier
. If too many warnings
are given, change to
Normal
.
If the driver feels that warnings are given too
often, the warning level can be lowered. This
means that warnings will be provided later, result-
ing in fewer warnings being given.
The setting
Later
should only used in exceptional
circumstances, e.g., for a more dynamic driving
style.
WARNING
•
No automatic system can be guaranteed
to function 100% correctly in all situa-
tions. For that reason, never test City
Safety by driving toward a person or
object. This could result in serious injury
or death.
•
Even if the setting
Earlier
has been
selected, warnings may be perceived as
being given late, e.g., if the difference in
speed is great or if the vehicle ahead
brakes suddenly.
•
City Safety can provide a warning for a
potential collision but it can never shorten
the driver's reaction time.
•
To help make City Safety as effective as
possible, always using the setting
Earlier
is recommended.
•
Due to local traffic regulations in certain
markets, RCW will
not
activate the rear
turn signals. That part of the function will
be deactivated.
•
The use of the rear turn signals will also
be deactivated if the City Safety warning
level is set at
Later
. See also the section
"Setting a warning level (distance)" in the
article "City Safety settings."
•
If RCW detects a vehicle approaching
from behind, the seat belt pretensioners
Summary of Contents for S 90
