Work lights roof
Work lights rear are operated with switch SW3505 located on the
pillar panel.
- Switch upper part pressed in = Work lights cab and radiator
casing on when reverse gear is engaged.
- Switch in middle position = Work lights cab and radiator casing
on.
- Switch lower part pressed in = Work lights off.
Control light on the front instrument panel indicates that work
lights are on.
See
370, Wiring diagram 305.
For double work lights cab, see
370, Wiring diagram 312.
Work lights rear, continuous/gear-dependent (optional equip‐
ment)
With this function, it is only possible to select continuous or gear-
dependent engagement of work lights rear.
Selection of function with switch SW3505 located on the pillar
panel.
- Switch upper part pressed in = Work lights cab and radiator
casing on when reverse gear is engaged.
- Switch in middle position = Continuous work lights cab and
radiator casing on.
- Switch lower part pressed in = Continuous work lights cab and
radiator casing on.
Control light on the front instrument panel indicates that work
lights are on.
See
370, Wiring diagram 313.
Guide lights in switches and lighting in climate control system's
panel
Light intensity for guide lights in switches and lighting in climate
control system's panel are controlled with rheostat R3502.
- Rheostat's upper part pressed in = light intensity increases.
- Rheostat's lower part pressed in = light intensity decreases.
See
370, Wiring diagram 304.
26
