© Rototilt Group AB
2018-03-16
English
EN
Handle
The functions of the rollers and switches
are described on the menu.
Information about handle configuration is
specified in three places: On the sticker,
on the display and in the Instructions for
Use for the base machine/excavator.
The roller direction can be changed:
select the function and confirm with OK.
Shift direction with x/x, middle function
button (green).
A dash above the function shows that it is
inverted. Confirm with OK.
The user can toggle the position of tilt
and rotation.
Switch the position using the left function
button (blue). A warning text will now be
displayed in the menu view.
A larger warning text is also displayed
upon each start-up of the system, and
upon each activation of the shut-off lever.
The warning must be confirmed with OK
to activate the tiltrotator’s functions.
The ability to switch positions for the
rotation and tilt functions should be used
as seldom as possible.
!
IMPORTANT
- The base machine/excavator’s factory-
installed handles have been replaced with handles
adapted to the control system.
Carefully check the changed functions, for both the base
machine/excavator and alternative control.
i
INFO
- Profile 0 is reserved for the installer and cannot
be modified by another user.
2200397_ _6909