© Rototilt Group AB
2018-03-16
2
1
1
2
3
EN
English
Quick coupler with SecureLock
Operate in the same way as the quick
coupler without SecureLock, see above.
When the quick coupler is opened a
warning is given that the locking cylinder
has been retracted and is in the open
position.
When the quick coupler is closed, the
message indicates that the locking
cylinder is extended and is in a securely
locked position.
Inspection of quick coupler locking
function.
A warning text appears on the display if
the tool is not coupled correctly.
If you do not intend to couple a tool, the
warning must be acknowledged.
First press the green function key and
release it.
Now press the OK function key. The
buzzer warning signal stops.
Return to the start menu using any key.
A visual warning will be shown at
30-second intervals as long as Rototilt®
is running without a tool and remains
visible until any key is pressed again.
Quick coupler QuickChange™
Operation is the same as for the quick
coupler; see above.
When the quick coupler is opened a
warning is given that the locking pistons
has been retracted and that the quick
coupler is in the open position
When closing the coupler, the first pin (1)
is engaged, followed by pin (2) and finally
the locking bolts (3)..
The quick coupler locking function cannot
be closed until both pins in the attach-
ment frame are positioned correctly.
The position on the quick coupler’s three
sensors are monitored continuously.
All sensors are shown in green on the
display when a tool is coupled correctly.
Perform
Inspection of quick coupler
locking function
.
2200397_ _6909