manualshive.com logo in svg

Volvo EC35, Operator'S Manual, Page: 45 / 140

Share
Download
Volvo EC35 Operator'S Manual Download Page 45

Operating instructions

Stopping the engine

 43

Long-term parking

IMPORTANT! If the machine is not going to be used every 
day, all cylinders should be greased as protection against 
corrosion.

1 Wash the machine down and touch up any damaged paint fi-

nish to avoid rusting.

2 Treat unprotected parts with an anti-corrosion agent. Lubricate 

the machine thoroughly and grease bright surfaces (lifting/tip-
ping cylinders etc.).

3 Fill the fuel tank and the hydraulic oil tank to the max. marks.
4 Cover the exhaust pipe (for outdoors parking).
5 Make sure the coolant level in the cooling system is high 

enough (in case of frost).

6 Park the machine on level and firm ground. Locations with a 

high risk of earth slides or flooding and the danger of freezing 
to the ground should be avoided. Do not park the machine on 
slopes.

Check after long-term parking

Q

All oil and fluid levels

Q

Tension of all belts

Q

Air cleaner unit

Q

Track tension

Summary of Contents for EC35













































































































































Reviews:

No comments