NOTICE
If a high-pressure washer is used when cleaning, work carefully since damage may be caused to electrical
components and insulation of the electrical cabling even at relatively moderate water pressure and
temperature. Protect electrical cabling in a suitable manner.
Keep the machine especially clean when operating in environments with fire hazards, such as saw mills, garbage
dumps, etc. In such environments, suitable equipment to reduce the risk of accumulation of material and
spontaneous combustion should be fitted (for example muffler guard, radiator screen, heavy-duty cyclone pre-
cleaner, etc.).
Electrical system
Check electrical cables with regard to chafing damage and make sure that they cannot be damaged in such a way.
This applies particularly to unfused electrical cables, which are red.
For example, electrical cables between:
Batteries
Battery-starter motor
Alternator-starter motor
Cable to engine preheating coil.
When unfused cables have been disconnected, it is important to check that they are re-connected and clamped in
such a way that they cannot be exposed to chafing. Unfused cables must not rest against oil and fuel hoses.
When fitting any optional equipment, make sure that all cables (circuits) are connected across a fuse and routed
and clamped so that there is no risk of chafing.
Fuel, hydraulic and brake systems
Check to make sure that there is no chafing damage to fuel, hydraulic and brake hoses.
Welding and grinding
Welding and grinding on the machine may only be done in a clean area and not in places that contain combustible
liquids, such as fuel tanks, hydraulic pipes or similar.
Work with extra care when welding and grinding near flammable objects.
NOTICE
A fire extinguisher should be easily accessible during all welding work.
Never weld on a painted surface without first removing the paint. Welding on a painted surface generates, in
addition to health-hazardous vapours, technically inferior welds which may lead to future failures, with subsequent
accidents.
Actions after a fire: see “Checklist after a fire or heat exposure”.