Volvo 850 1976 Manual Download Page 56

Page: 56 / 147

Remote controlled central locking/alarm

Battery

When replacing the battery you must

dispose of it so that it does not harm

the environment. Let your Volvo dealer

help you.

Remote control

Remote controlled central

locking/alarm (extra equipment)

Your car can be fitted with a remote control-

led central locking system as an optional

extra. The system works on a frequency that

makes it possible to operate the door and

boot locks without a key. Two coded remote

controls, which can be attached to your key

ring, are supplied with the car. The remote

control can be used to unlock/lock all doors

and the boot from a distance of 3-5 metres

from the car.

Press either the LOCK or UNLOCK buttons.

Press the LOCK button twice within three

seconds (although not too quickly) to

2:26

activate the "deadlock" locking position and

the alarm.

NOTE! A red LED flashes on the upper side

of the instrument panel to indicate that the

alarm has been activated.

The remote control should not be used to

lock the doors from the inside. For safety

reasons it is not possible to lock the doors

when the ignition key is in position I or II.

However, it is possible to unlock them.

To prevent theft the remote control should not

be left on the key ring when the car goes into

the workshop. Contact your Volvo dealer

immediately if either of the remote controls are

lost.

Replacing the battery

If the remote control does not work at a normal

distance from the car the battery generally needs

replacing.

Replacing the battery:

•

Remove the back of the remote control

using a coin.

•

Replace the battery (Type CR2025). Put the

battery in so that the side with text on

faces upwards enabling the cover to be

closed.

•

Replace the cover and check it fits tightly

so that water cannot get in.

WARNING!

Do not lock the doors in the "deadlock"

locking position from inside the car. In

the event of an accident, locked doors

would prevent those giving assistance and

emergency services from gaining access to

the car quickly.

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for 850 1976




















































































































































Search results

Summary of Contents for 850 1976

Reviews:

Related manuals for 850 1976

Brands by name

Popular brands

Volvo 850 1976, Manual

Search results

Summary of Contents for 850 1976

Reviews:

Related manuals for 850 1976

Brands by name

Popular brands