
18
IMG-231568
Continue downwards on the inside of the subframe.
19
IMG-231571
Drill a Ø 4mm (5/32 ") hole for the front intake grounding on the
underside of the left front side member as illustrated.
Deburr the hole edges, remove the drill swarf and apply
rustproofing agent.
Take a screw and toothed washer from the kit and tighten in the
ground cable.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Electric engine heater, 230V, (R-design)- 31399512 - V1.1
Page 13 / 33