14
IMG-231564
Press the protective cover from the kit into place in the hole cut in
the bumper cover.
Take the cable for the front engine block heater socket with
ground lead from the kit and thread them through the protective
cover.
15
IMG-231566
Install the attaching brace and nut from the kit.
Plug the electrical connector into the front engine block heater
socket. Use the connector as a counterhold when tightening.
Tighten the front engine block heater socket to the bumper shell.
Press the cable into the holder on the washer fluid reservoir.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Electric engine heater, 230V, (R-design)- 31399512 - V1.1
Page 11 / 33