05 Comfort and driving pleasure
Trip computer
05
234
*
Option/accessory, for more information, see Introduction.
Heading combinations
Description
Average fuel consumption
Trip odometer T1 + mileage
Average speed
•
Press and hold
RESET
to reset trip odometer T1.
Current fuel consumption
Trip odometer T2 + mileage
Distance to empty
•
Press and hold
RESET
to reset trip odometer T2.
Current fuel consumption
Mileage
mph<>kmh
Change between mph<>kmh – see "Digital speed display" on
page 234.
-
No trip computer informa-
tion displayed
-
No information will be displayed. This also indicates the begin-
ning/end of the list of information headings.
Scroll among the trip computer information
headings at any time by turning the
thumb
wheel
until the desired heading is displayed.
Supplementary information
Average fuel consumption
Fuel consumption since the last time this
function was reset.
Average speed
The vehicle's average speed since the last
time this function was reset.
Current fuel consumption
Current fuel consumption is calculated
approximately once a second. When the vehi-
cle is moving at low speed, fuel consumption
is displayed per unit of time. At higher
speeds, it is displayed in terms of distance.
Miles or kilometers can be displayed, see the
heading "Changing units" on page 235
Distance to empty
This function shows the approximate dis-
tance that can be driven on the fuel remaining
in the tank. When
Distance to empty
shows
"----", there is very little useable fuel remain-
ing in that tank; refuel as soon as possible.
The calculation is based on average fuel con-
sumption during the last 20 miles (30 km) of
driving and the amount of fuel remaining in
the tank (the accuracy of this figure may vary
if your driving style changes). An economical
driving style will generally increase this dis-
tance.
See page288 for information about driving
economically.
Digital speed display*
Speed is expressed in the unit not used by
the instrument panel's speedometer e.g., if
the normal speedometer is in mph, the trip
computer will display in the speed in km/h
and vice versa.
Resetting an analog instrument panel
Trip odometer(s) and average speed
1. Display trip odometer T1 or T1, or Aver-
age speed.
2. Press and hold
RESET
until selected
function is reset.
Each trip computer heading must be reset
individually.
Summary of Contents for 2015 S60
