143
Parking light
Removing the defective bulb:
1. Switch off the headlights and turn the
ignition switch to position 0.
2. Remove the plastic cover of the low beam
headlight assembly. Pull out the parking
light holder.
3. Pull the bulb out of the holder.
Installing the new bulb:
1. Press a new bulb into the holder
2. Reinsert the bulb and holder into place.
3. Reinstall the plastic cover.
Turn signal, driver’s side
Removing the defective bulb:
1. Switch off the headlights and turn the
ignition switch to position 0.
Parking light bulb
Turn signal, drivers side
Turn signal, passengers side
2. Pull out the bulb holder by twisting it
counterclockwise.
3. Remove the bulb from the holder by
pressing it in and turning it counterclock-
wise.
Installing the new bulb:
1. Insert the new bulb into the holder by
pressing it in and turning it clockwise.
2. Reinsert the bulb holder in the headlight
housing and twist it clockwise until it seats
properly.
Turn signal, passenger’s side
Removing the defective bulb:
1.
Switch off the headlights and turn the
ignition switch to position 0.
2.
Remove radiator pipe (1) from the box.
3.
Remove filler pipe screw (2).
4.
Pull the filler pipe (3) straight up.
5.
Remove vent hose (4) from filler pipe.
Installing the new bulb:
1.
Replace the bulb (same procedure as the
drivers side bulb).
2.
Ensure that the seal between the washer
fluid reservoir and the filler pipe is
correctly positioned.
3.
Press the filler pipe (3) back into position.
4.
Press the vent hose (4) into place on the
filler pipe.
5.
Reinstall and tighten the filler pipe screw
(2) .
6.
Reinstall the radiator pipe to the box (1).
Replacing bulbs
3501792m
3501787m
1
2
3
4
3602534m
Summary of Contents for 2006 XC70
