142
Replacing bulbs
Low beam headlight
Removing the defective bulb:
1. Switch off the headlights and turn the
ignition switch to position 0.
2. Remove the plastic cover.
3. Disconnect the wiring connector.
4. Loosen the retaining spring by first moving
it to the right and then moving it outward
and downward, out of the way.
5. Pull out the defective bulb.
Low beam bulb
High beam bulb
3501788
3501802m
3501786m
High beam headlight
Removing the defective bulb:
1. Switch off the headlights and turn the
ignition switch to position 0.
2. Remove the cover to access the bulb
assembly.
3. Pull out the bulb.
4. Disconnect the wiring connector.
5. Twist the bulb counterclockwise, and pull it
out of the holder.
Installing the new bulb:
1. Insert the new bulb into the holder. It can
only be inserted in one way.
2. Reconnect the wiring connector.
3. Reinsert the bulb into its position in the
headlight housing, with the wiring connec-
tor downward.
4. Press the cover back into place.
Installing the new bulb:
1. Insert the new bulb, without touching the
glass, with the guide lug upward. The bulb
will only seat properly in this position.
2. Move the retaining spring up and push it
slightly to the left until it seats properly.
3. Reconnect the wiring connector.
4. Reinstall the plastic cover.
NOTE:
If the vertical aim of your headlights
needs to be adjusted for any reason (e.g.,
towing a trailer for extended periods), this
should be done by an authorized Volvo
retailer.
Summary of Contents for 2006 XC70
